Motorola xpr 6500 Manual De Usuario
Identifying Radio Controls
English
9
Push-To-Talk (PTT) Button
The PTT button on the side
of the radio serves two basic
purposes:
of the radio serves two basic
purposes:
•
While a call is in progress,
the PTT button allows the
the PTT button allows the
radio to transmit to other
radios in the call.
Press and hold down PTT
button to talk. Release the
PTT button to listen.
The microphone is
activated when the PTT
button is pressed.
•
While a call is not in progress, the PTT button is used to make
a new call (see Making a Radio Call on page 16).
a new call (see Making a Radio Call on page 16).
If the Talk Permit Tone is enabled (see Turning the Talk Permit
Tone On or Off on page 56), wait until the short alert tone ends
before talking.
Tone On or Off on page 56), wait until the short alert tone ends
before talking.
During a call, if the Channel Free Indication feature is
enabled on your radio (programmed by your dealer), you
will hear a short alert tone the moment the target radio (the
radio that is receiving your call) releases the PTT button,
indicating the channel is free for you to respond.
enabled on your radio (programmed by your dealer), you
will hear a short alert tone the moment the target radio (the
radio that is receiving your call) releases the PTT button,
indicating the channel is free for you to respond.
You will also hear the Channel Free Indication tone if your
call is interrupted, for example when the radio receives an
Emergency Call.
You can turn off the Channel Free Indication tone by
disabling all radio tones and alerts (see Turning the Radio
Tones/Alerts On or Off on page 56).
call is interrupted, for example when the radio receives an
Emergency Call.
You can turn off the Channel Free Indication tone by
disabling all radio tones and alerts (see Turning the Radio
Tones/Alerts On or Off on page 56).
Switching Between Analog
and Digital
Mode
Each channel in your
radio can be configured
as an analog channel or a
digital channel. Use the
Channel Selector Knob to
switch between an analog
or a digital channel.
radio can be configured
as an analog channel or a
digital channel. Use the
Channel Selector Knob to
switch between an analog
or a digital channel.
When switching from digital to analog mode, certain features
are unavailable. Icons for the digital features (such as
Messages) reflect this change by appearing “grayed out’.
Disabled features are hidden in the menu.
are unavailable. Icons for the digital features (such as
Messages) reflect this change by appearing “grayed out’.
Disabled features are hidden in the menu.
Your radio also has features available in both analog and digital
mode. However, the minor differences in the way each feature
works does NOT affect the performance of your radio.
mode. However, the minor differences in the way each feature
works does NOT affect the performance of your radio.
NOTE: Your radio also switches between digital and analog
PTT
Button
Button
Channel
Selector
Knob
Selector
Knob
NAG-LACR-EMEA.book Page 9 Monday, April 28, 2008 4:59 PM