Motorola RMU2080D Manual De Usuario

English

You can enable or disable the Channel 
Scanning feature for each channel in your 
radio. To do so, enter the Advanced 
Configuration Mode and select the channel you 
want to program. Scroll through the 
programming modes by short pressing the PTT 
button or 

 

(Menu) button until you reach 

the ‘Scan Programming Mode’. 

The radio display shows the Scan 
Programming Mode as follows:

Both the channel number and current scan 
setting (YES = Enable or NO = Disable) blinks 
on the display, indicating you can choose your 
setting. To set the channel number, rotate the 
Channel Selector Knob until you reach the 
desired channel number.

Once you have selected the channel, proceed 
to enable (‘YES’) or disable (‘NO’) the scan 
feature by pressing the SB2 (*) button. Once 
you have set the values you need, long press 
the PTT button to exit and save, or short press 
the PTT button to move to the next 
programming feature without saving.

•

(*) This assumes the SB2 button is not 
programmed for a different mode.

•

If the Maximum Channel setting in the radio is set 
to ‘1’, the Scan Programming option is disabled 
and will not show on the radio display.

Weather Channel Programming Mode is the 
last programming mode available. You can 
enable or disable the Weather Channel. 

To do so, enter the Advanced Configuration 
Mode and select the channel you want to 
program. Scroll through the programming 
modes by short pressing the PTT button or