Motorola RDV2080d Manual De Usuario

English

ENTERING PROGRAMMING MODE
To enter ‘Programming Mode’, press and hold 
both the PTT button and the SB1 button 
simultaneously for three seconds, while turning 
ON the radio. A unique tone will sound, 
indicating that the radio has entered 
’Programming Mode’ and the radio LED will 
signal a green heartbeat. Once the radio enters 
the ‘Programming Mode’, which defaults to 
‘Idle’ Programming Mode, the LED will blink a 
green heartbeat.
Whenever you enter ’Programming Mode’ the 
PROG icon will be displayed and the current 
channel aliasing name will be blinking to 
indicate that you can select the channel you 
want to program. 

You can scroll up/down to select the different 
channels by pressing the 

/

 buttons.

In ‘Programming Mode’ your radio is capable of 
setting values for each channel by moving 
between the different programming modes 
available: Frequencies, CTCSS/DPL codes 
(Interference Eliminator Code), Scramble, 
Bandwidth, Maximum Channels, Call Tone, 
Microphone Gain and Scan.

•

To move along the different Programming 
Selection Modes without saving changes, 
short press the PTT button or MENU button.

•

To save changes long press the PTT button. 
The radio will return to ‘Idle’ Programming 
Mode.