Motorola rdm2080d Manual De Usuario

Advanced Configuration is an optional 
configuration mode that allows the 
customization of additional features via the 
front panel.

To establish a proper two-way communication,
the Channel, Frequency, and Interference
Eliminator Code must be the same on both
radios, which will depend on the stored profile
that has been pre configured on the radio. 

ENTERING ADVANCED CONFIGURATION 
MODE
To enter Advanced Configuration Mode, press 
and hold both PTT and SB1 buttons 
simultaneously for 3 to 5 seconds while turning 
radio ON. The LED will start to blink green. 
The RDM2080d will also show the icon 

 

on the screen.

These features can be configured in Advanced 
Configuration Mode:

FREQUENCY SELECTION
Any of the preset MURS frequencies can be 
assigned to each channel.   See "RDM Series 
MURS Frequency Chart" on page 50.

CTSS/DPL CODES
This feature also called Interference Eliminator 
Code, helps minimize interference by offering a 
choice of code combinations that filter out 
static, noise, and unwanted messages. See 
code table "CTCSS and PL/DPL Codes" on 
page 52 for specific code details.

AUTO SCAN
This feature enables to set a particular channel 
to automatically start scanning each time that 
channel is selected.