Garmin 530HCx Manual De Usuario

B

aSIc

 o

peratIon

temporarily turns off the squelch, allowing you to hear 

the open channel. If you see an “Activity...” message, 

there is activity on the selected channel, but the incoming 

signal is not audible if it does not match the code. Choose 

“monitor” to hear all the activity on a channel.

1.  Select the 

Scan or Monitor button. Scan starts 

searching through the available channels. 

Monitor opens the channel to listen to any radio 

transmissions on that channel.

2.  To stop using either option, select the button.

1.  Open the option menu and select Setup Scanlist.
2.  To add or remove a channel from the list, select 

the channel and press 

Enter to add or remove the 

check mark in front of the name. Only channels 

that are checked are scanned.

3.  To select all channels or clear all channels, select 

either the Select All or Clear All.

4.  To Scan Current Codes, select the option menu, 

choose a setting, and press 

Enter.

Use the Radio page option menu to customize aspects of 

your Rino such as setting up the radio, programming call 

and ring tones, and setting up a scanlist.