Garmin 530HCx Manual De Usuario

M

aIn

 M

enu

1.  With the Track Log setup page shown, select the 

Data Card Setup button, and press Enter to open 

the Data Card setup page.

2.  Select the

 Log Track to Data Card option, and 

then press 

Enter to activate. 

  This file is a continuous compilation of all track 

data for that date. As long as enabled, a new file is 

recorded for each day until the card is filled.

  Track logs share card space with MapSource 

mapping data, so storage space is reduced. Open 

the 

Card Info option from the option menu to view 

the amount of card storage space available

3.  To read or transfer the .gpx files, connect to your 

PC and enable the USB Mass Storage feature as 

another .gpx file-compatible application.

4.  To delete these track logs from the microSD card, 

select individual logs, and then press 

Enter. Use 

the 

Delete All button to clear the entire list. To 

avoid data corruption, do not remove the card from 

the unit while logging tracks.

When you are ready to return to where you started, the 

Rino takes you back by following the track log that you 

left behind. You can save a total of 20 tracks in the unit 

memory. When you no longer need a Track Log, press the 

Clear button to remove it.

  Select the 

TracBack button and the track is shown 

on the map and you are prompted to select the 

point you want to TracBack to.

When the track log memory field reaches 100%, the most 

recent track points start to overwrite the least recent if the 

default setting Wrap When Full remains selected on the 

track log setup. To avoid losing track points you want, 

save the track log when it approaches the 99% mark. The 

active track log stores up to 10,000 points.
The Saved Track page shows the track and it can also be 

shown on the Main Map page as you navigate. You can 

save up to 20 tracks with 500 points per track in the unit. 

Saved contact tracks count towards this total.