Toshiba 17HLV85 Manual De Usuario

Amplifier equipped with

a DTS decoder

To COAXIAL
type digital
audio input

To COAXIAL
DIGITAL AUDIO
OUT

Dolby Digital
Dolby Digital is the surround sound technology used in theaters
showing the latest movies, and is now available to reproduce this
realistic effect in the home. You can enjoy motion picture and live
concert DVD video discs encoded via the Dolby Digital recording
system with this dynamic realistic sound by connecting the TV/DVD to
a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby
Digital processor. If you have a Dolby Surround Pro Logic decoder, you
will obtain the full benefit of Pro Logic from the same DVD movies that
provide full 5.1-channel Dolby Digital soundtracks, as well as from titles
with the Dolby Surround mark.

Digital Theater Systems (DTS)
DTS is a high quality surround technology used in theaters and now
available for home use, on DVD video discs or audio CDs.
If you have a DTS decoder or processor, you can obtain the full benefit
of 5.1 channel DTS encoded sound tracks on DVD video discs or audio
CDs.

Amplifier equipped with a

Dolby Digital decoder

To COAXIAL
type digital
audio input

To COAXIAL
DIGITAL AUDIO OUT

Manufactured under license from Dolby
Laboratories. Dolby, Pro Logic, and the
double-D symbol are trademarks of Dolby
Laboratories.

You will need:
• one coaxial cable

• Connect the COAXIAL DIGITAL AUDIO

OUT jack of the TV/DVD to the “COAXIAL”
input of a Receiver or Processor.

• Refer to the owner’s manual of the

connected equipment as well.

• The output sound of the TV/DVD has a wide

dynamic range. Be sure to adjust the
receiver’s volume to a moderate listening
level. Otherwise, the speakers may be
damaged by a sudden high volume sound.

• Turn off the amplifier before you connect or

disconnect the TV/DVD’s power cord. If you
leave the amplifier power on, the speakers
may be damaged.

You will need:
• one coaxial cables

• DO NOT connect the COAXIAL DIGITAL

AUDIO OUT jack of the TV/DVD to the AC-3
RF input of a Dolby Digital Receiver.  This
input on your A/V Receiver is reserved for
Laserdisc use only and is incompatible with
the COAXIAL DIGITAL AUDIO OUT jack of
the TV/DVD.

• Connect the COAXIAL DIGITAL AUDIO

OUT jack of the TV/DVD to the “COAXIAL”
input of a Receiver or Processor.

• Refer to the owner’s manual of the

connected equipment as well.

• The output sound of the TV/DVD has a wide

dynamic range. Be sure to adjust the
receiver’s volume to a moderate listening
level. Otherwise, the speakers may be
damaged by a sudden high volume sound.

• Turn off the amplifier before you connect or

disconnect the TV/DVD’s power cord. If you
leave the amplifier power on, the speakers
may be damaged.

DTS and DTS Digital Out are trademarks of
Digital Theater Systems, Inc.

 5U90121A(E)P11-21

6/20/05, 4:05 PM

18