Polycom 3725-76302-001O Manual De Usuario
Users and Groups
Polycom, Inc.
315
Resource priority value
If the RealPresence DMA system is deployed in an AS-SIP environment with a
resource prioritization mechanism and Local Session Controller (LSC), set this to the
priority value to assign to conferences using this conference room. If using a custom
namespace, enter the value in the box below the list.
The string namespace:value is used in the SIP Resource-Priority header of
outbound calls from this conference room and recorded in the conference property
changes.
For inbound calls to this conference room:
•
resource prioritization mechanism and Local Session Controller (LSC), set this to the
priority value to assign to conferences using this conference room. If using a custom
namespace, enter the value in the box below the list.
The string namespace:value is used in the SIP Resource-Priority header of
outbound calls from this conference room and recorded in the conference property
changes.
For inbound calls to this conference room:
•
If the INVITE message contains a resource priority value, the RealPresence DMA
system passes that value to the MCU.
system passes that value to the MCU.
•
If the INVITE message doesn’t contain a resource priority value, the
RealPresence DMA system provides the value assigned here to the MCU on
behalf of the endpoint.
RealPresence DMA system provides the value assigned here to the MCU on
behalf of the endpoint.
In either case, the resource priority value is recorded in the call property changes.
Presence
In a Microsoft® Lync 2013 environment, you can configure presence publishing (the
publishing of VMR status to a Lync 2013 client contact list) for each VMR. Enable
this check box to override the system-wide default presence publishing settings
defined on the Admin > Conference Manager > Conference Settings page.
Note: This property is visible only if the Publish presence for Polycom conference
contacts check box is enabled on the Admin > Conference Manager >
Conference Settings page.
Depending on the settings of the Publish presence for Polycom conference
contacts and Create Polycom conference contacts check boxes on the Admin >
Conference Manager > Conference Settings page, there are two modes of
operation for this field:
•
publishing of VMR status to a Lync 2013 client contact list) for each VMR. Enable
this check box to override the system-wide default presence publishing settings
defined on the Admin > Conference Manager > Conference Settings page.
Note: This property is visible only if the Publish presence for Polycom conference
contacts check box is enabled on the Admin > Conference Manager >
Conference Settings page.
Depending on the settings of the Publish presence for Polycom conference
contacts and Create Polycom conference contacts check boxes on the Admin >
Conference Manager > Conference Settings page, there are two modes of
operation for this field:
•
When Publish presence for Polycom conference contacts is checked and
Create Polycom conference contacts is unchecked, the following options are
displayed:
Create Polycom conference contacts is unchecked, the following options are
displayed:
Publish presence
Do not publish presence
These options control whether the RealPresence DMA system will publish presence
status for this Polycom conference contact.
•
status for this Polycom conference contact.
•
When both Publish presence for Polycom conference contacts and Create
Polycom conference contacts are checked, the following options are displayed:
Polycom conference contacts are checked, the following options are displayed:
Create contact and publish presence
Do not create contact or publish presence
These options control whether the RealPresence DMA system will create an Active
Directory contact resource for and publish presence for this Polycom conference
contact.
Directory contact resource for and publish presence for this Polycom conference
contact.
Conference Duration
Maximum duration of a conference (in hours and minutes) or Unlimited (the
maximum in this case depends on the MCU).
If not selected, the room uses the longest duration associated with any group to
which the user belongs, or if none, the system’s default maximum duration (see
maximum in this case depends on the MCU).
If not selected, the room uses the longest duration associated with any group to
which the user belongs, or if none, the system’s default maximum duration (see
Field
Description