Polycom 3725-76302-001O Manual De Usuario

 

Users and Groups

Polycom, Inc. 

319

Resource priority 
namespace 

In an Assured Services SIP (AS-SIP) environment, a Local Session Controller (LSC) 
can provide priority-based precedence and preemption services to ensure that the 
most important calls get through. If your organization has implemented such a 
resource prioritization mechanism and you want to assign this conference room a 
priority value different from the system’s default (see 

page 185), set this to the namespace being used for resource priority values. If the 
namespace being used isn’t listed, select Custom and enter the name in the box 
below the list. 

Resource priority value 

If the RealPresence DMA system is deployed in an AS-SIP environment with a 
resource prioritization mechanism and Local Session Controller (LSC), set this to the 
priority value to assign to conferences using this conference room. If using a custom 
namespace, enter the value in the box below the list. 
The string namespace:value is used in the SIP Resource-Priority header of 
outbound calls from this conference room and recorded in the conference property 
changes. 
For inbound calls to this conference room: 
•

If the INVITE message contains a resource priority value, the RealPresence DMA 
system passes that value to the MCU. 

If the INVITE message doesn’t contain a resource priority value, the 
RealPresence DMA system provides the value assigned here to the MCU on 
behalf of the endpoint. 

In either case, the resource priority value is recorded in the call property changes. 

Presence

In a Microsoft® Lync 2013 environment, you can configure presence publishing (the 
publishing of VMR status to a Lync 2013 client contact list) for each VMR. Enable 
this check box to override the system-wide default presence publishing settings 
defined on the Admin > Conference Manager > Conference Settings page.
Note: This property is visible only if the Publish presence for Polycom conference 
contacts check box is enabled on the Admin > Conference Manager > 
Conference Settings page.
Depending on the settings of the Publish presence for Polycom conference 
contacts and Create Polycom conference contacts check boxes on the Admin > 
Conference Manager > Conference Settings page, there are two modes of 
operation for this field:
•

When Publish presence for Polycom conference contacts is checked and 
Create Polycom conference contacts is unchecked, the following options are 
displayed:




These options control whether the RealPresence DMA system will publish presence 
status for this Polycom conference contact.
•

When both Publish presence for Polycom conference contacts and Create 
Polycom conference contacts are checked, the following options are displayed:




These options control whether the RealPresence DMA system will create an Active 
Directory contact resource for and publish presence for this Polycom conference 
contact.