Polycom 3725-76302-001O Manual De Usuario

 

Local Cluster Configuration

Polycom, Inc. 

83

1 Go to Admin > Local Cluster > Licenses. 
2 In the Activation key field for the first (or only) server, enter the activation key code that was 

generated for that server’s serial number. 

3 If you have a two-server cluster, in the Activation key field for the second server, enter the 

activation key code that was generated for that server’s serial number. 

4 Click Update. 

A dialog box informs you that the licenses have been updated. 

5 Click OK. 

See also: 

1 Go to Admin > Local Cluster > Signaling Settings. 
2 To make the system accessible via H.323 calls: 

a Select Enable H.323 signaling. 
b Leave the default port numbers (1720 for H.225, 1719 for RAS) unless you have a good reason 

for changing them. 

c Select H.323 multicast to support gatekeeper discovery messages from endpoints. 
d To turn on H.235 authentication, select Enable H.323 device authentication. 

Device authentication credentials must be added on the Inbound Authentication tab of the 

Device Authentication page. Click the Device authentication settings link to go directly there. 

3 To make the system accessible via SIP calls: 

a Select Enable SIP signaling. 
b To enable pass-through of ANAT signaling (RFC 4091 and RFC 4092) in the Session Description 

Protocol (SDP) for the purpose of negotiating IP version in a dual-stack (IPv4 + IPv6) 

environment, select Enable ANAT support. 

c If the system’s security settings permit unencrypted SIP connections, optionally set Unencrypted 

SIP port to TCP or UDP/TCP. 
You must have the Administrator role to change security settings. See 

Caution: Activation Keys Linked to the Server Serial Number
An activation key is linked to a specific server’s serial number. Each Activation Key field is labeled 
with a serial number. For a two-server cluster, make sure that the activation key code you enter for 
each server is the correct one for that server’s serial number.