Polycom 3725-76302-001O Manual De Usuario

 

Device Management

Polycom, Inc. 

93

The Actions list associated with the Endpoints list contains the items in the following table. 

Registration Status 

The registration status of the device: 
•

Active — The device is registered and can make and receive calls. 

Inactive — The device’s registration has expired. Whether it can make and 
receive calls depends on the system’s rogue call policy (see 

 on page 234) and. It can register again. 

Quarantined — The device is registered, but it can’t make or receive calls. 
It remains in Quarantined or Quarantined (Inactive) status until you remove 
it from quarantine. 

Quarantined (Inactive) — The device was quarantined, and its registration 
has expired. It can register again, returning to Quarantined status. 

Blocked — The device is not permitted to register. It remains blocked from 
registering until you unblock it. 

If the device is in a site managed by the system, its ability to make and 
receive calls depends on the system's rogue call policy (see 

If the device is not in a site managed by the system, it can’t make or 
receive calls. 

A device’s status can be determined by: 
•

An action by the device. 

An action applied to it manually on this page. 

The expiration of a timer. 

The application of a registration policy and admission policy (see 

Exceptions 

Shows any exceptions with which the device was flagged as a result of 
applying a registration policy. 

Active Calls 

Indicates if the device is in a call. 

Device Authentication 

Indicates whether the endpoint must authenticate itself. 
Note: Inbound authentication for the device type must be enabled at the 
system level (see 

 on page 261), or the setting for the 

device has no effect. 

View Details 

Opens the Device Details dialog box for the selected endpoint. 

Add Opens 

the 

Add Endpoint dialog box, where you can manually add a device to the 

system. 

Edit Opens 

the 

Edit Endpoint dialog box for the selected endpoint, where you can 

change its information and settings. If multiple endpoints are selected, opens the 
Edit Endpointdialog box, where you can change the device authentication, 
permanent registration, and class of service settings.