Behringer VP1 Manual De Propietario

Authentic Vintage-Style Phase Shifter

Thank you for showing your confidence in us by purchasing the BEHRINGER VINTAGE PHASER VP1. 

This high-quality effect pedal is designed for all musicians who want to their sound some extra pep. 

Thanks to its high-performance features you get authentic and classic three dimensional phase 

shifting—from rapid rotary speaker to impressive jet plane effects.
With the phaser, a second, phase-shifted signal is added to the original audio signal. The resulting sound 

is thicker and above all livelier. This effect is often used for guitar sounds and keyboards. In the ’70s, 

it was also extensively used for other instruments like electric pianos.

(1) 

The RATE control determines the speed of the phase shifting effect.

(2) 

The TONE switch lets you chose between negative feedback (lower position) or positive feedback 

(upper position) phaser modes. Negative feedback means that the delayed signal is inverted before it 

is fed back to the original signal. In positive feedback mode the delayed signal is not inverted. In this 

case the effect has a more detuned character enabling to use the unit as vibrato effect for example.

(3) 

The STATUS LED illuminates when the effect is activated.

(4) 

Use the footswitch to activate/deactivate the effect.

(5) 

Use this ¼" TS INPUT connector to plug in the instrument cable.

(6) 

The ¼" TS OUTPUT connector sends the signal to your amp.

Use the DC IN connection at the front of the unit to plug in a 9 V power supply (not included). 
The BATTERY COMPARTMENT is located on the bottom. Open the lid to install or replace the 9 V battery.

The SERIAL NUMBER is located on the bottom.

(2)

(6)

(5)

(3)

(4)

(1)