Siemens SL100 Manual De Usuario

Gigaset SL 100 / AUS/NZL / A31008-L100-L102-1-7619 / registration.fm / 08.03.2004

The handset should be between 1 and 2 metres away from the baby. The microphone 

must be directed towards the baby. 
When the room monitor is activated, incoming calls to the handset which is near the 

baby are indicated without a ring tone, they are just shown on the display. The display 

and the key pad are not illuminated.
When entering an external telephone number, make sure: 

◆

The handset in the baby's room is not barred for outgoing calls. 

◆

The number to which the alarm calls is sent is not blocked by an activated answering 

machine. 

W

i

◆

If you redirect your room monitor to an external number, then you 

should tell that number's owner.

◆

The room monitor's call to an external phone number stops after 

about 90 seconds, to an internal number (handset) it stops after 

about 180 seconds (depending on the base station). 

◆

The room monitor function severely curtails the handset's operating 

time. You can leave the handset in the baby's room in the charging 

unit. This will avoid the battery going flat.

◆

The room monitor function can also be used in Walk and Talk mode.

v

 

Open the menu.

s

Select the menu item and confirm. 

Confirm. The input field is opened.
Step 2: Activate the room monitor:

r

 

In the line Room M.: select On. 
Step 3: Enter the telephone number:

R[RRRRRRRRRRRRRRRRRRR]

s

Scroll to the Call to: line and press the display key. 

The input field for the telephone number is opened.

Enter an internal number as the "call to" number:

[RRRRRRRRRRRRRRRRRRRRR]

Press the display key.

s

Select the handset and confirm.

Enter an external number as the "call to" number:

~

 

Enter the telephone number.
Press the display key.

Confirm. The entry is stored.

à