Linksys WPG54G Manual De Usuario

6

Chapter 3: Getting to Know the Presentation Player

This chapter describes what is on the back and front panels of the Presentation Player, and the remote control.

The Presentation Player's ports, where a network cable is connected, and the reset button are located on the 
back panel. See Figure 3-1.

The USB port is where you will connect the USB memory disk device.

The Monitor/Projector port is where you will connect the VGA cable from the monitor or 

projector where your presentation will be displayed.

This LAN (Local Area Network) port connects to Ethernet network devices, such as a 

switch or router.

The Power port is where you will connect the power adapter.

There are two ways to reset the Presentation Player's factory defaults. Either press the 

Reset Button, for approximately ten seconds, or restore the defaults from the 
Administration tab in the Presentation Player's Web-based Utility.

With these, and many other, Linksys products, your networking options are limitless. Go to the Linksys website at 
www.linksys.com for more information about products that work with the Presentation Player. 

 

Important: Resetting the Presentation Player will erase 

all of your settings (WEP Encryption, Wireless and LAN 

settings, etc.) and replace them with the factory default 

settings. Do not reset the Presentation Player if you want 

to retain these settings.