Black Box Industrial SFP/SFP Multi-Power Mode Converter Manual De Usuario

Chapter 3: Install the Industrial SFP/SFP Multi-Power Mode Converter 

 

Page 8 

724-746-5500   |   blackbox.com 

LGC300A-R2

 

3.  Install the Industrial SFP/SFP Multi-Power Mode Converter 
The Industrial SFP/SFP Multi-Power Mode Converter installs anywhere as a 
standalone, table-top device or on a DIN rail.  

As a standalone device, install it in locations with limited space.   

If multiple connections are required, use an IE-PowerTray/18 enclosure (sold 
separately).  The tray allows for 18 conversions in a 1.5 rack unit of space.  
The units can also be powered by daisy-chaining DC power (refer to 
Cascading DC Power). 

 
3.1 SFP Port Requirements 
The Industrial SFP/SFP Multi-Power Mode Converter requires two SFP 
Modules of the same speed, either two Fast Ethernet (100Mbps) modules or 
two Gigabit Ethernet (1000Mbps) modules. 

 
3.2  DIN Rail Mounting 
The Industrial SFP/SFP Multi-Power Mode 
Converter includes two DIN clips, allowing 
installation on a DIN rail.  It mounts 
perpendicular to the DIN rail (as shown). 
 
Use the supplied screws to attach the DIN 
clips to the Industrial SFP/SFP, and then 
snap the converter to the DIN rail. 
 
To remove the converter from the DIN rail, 
use a flat-head screwdriver in the slot to 
gently pry the converter from the rail. 

 

 

 

 

 
 
3.3  Powering the Industrial SFP/SFP Multi-Power Mode Converter 
The Industrial SFP/SFP Multi-Power Mode Converter requires an external 
DC power source and has three options for powering as options:   
•  Universal AC power adapter with country specific clip (not included with 

module version).