Barco E-3620 Manual De Usuario
Display installation
Nio® medical display systems
41
USB connection
The USB connection allows you to use the display as USB hub, to
which you can connect USB devices, such as a keyboard, mouse
or digital camera.
which you can connect USB devices, such as a keyboard, mouse
or digital camera.
To connect the USB cable:
Figure 15
1. Connect a PC USB downstream connector to the display’s USB
upstream connector by means of a USB cable.
2. Connect any USB device to one of the display’s USB
downstream connectors.
Cable routing
Routing the signal cables
•
Bind the cables in the connector compartment together with
the cable tie inside the connector compartment.
the cable tie inside the connector compartment.
•
Put the connector compartment cover back on the display.
Pay attention that the signal cables are positioned under the
bulge in the cover.
Pay attention that the signal cables are positioned under the
bulge in the cover.
•
Push the cables into the clips on the rear of the tilt & swivel
foot.
foot.
(1)
(2)