Manual De UsuarioTabla de contenidosNumber of Speeds1Number of Dust Ports2• Eye Bolt M10-1.5 (may be installed)1• Hex Bolts M8-1.25 x 25 (Table)4• Flat Washers 8mm (Table, Fence, Rail)8• Lock Washers 8mm (Table, Rail)5• Lock Washers 6mm (Rail)3• Flat Washers 6mm (Rail)3• Cap Screws M6-1 x 20 (Rail)3• Cap Screw M8-1.25 x 20 (Rail)1• Knobs M8-1.25 x 20 (Rail)2• Hex Bolt M8-1.25 x 90 (Pos. Stop)1• Hex Nuts M8-1.25 (Pos. Stop, Fence)2• Lock Handle M8-1.25 x 44 (Fence)1• Moving Plate (Fence)1• Table Pin1Qty • Rail Plates3A. Bandsaw (not shown)1B. Table w/Table Insert1• Open End Wrench 10 x 13mm1C. Miter Gauge1D. Resaw Fence1E. Front Square Rail1F. Fence Assembly1G. Guide Post Handwheel1Hex Bolts M8-1.25 x 254Fence Assembly1Front Rail1Rail Plates3Cap Screws M6-1 x 203Flat Washers 6mm3Lock Washers 6mm3Cap Screw M8-1.25 x 201Knobs M8-1.25 x 202Flat Washers 8mm4Lock Washer 8mm1Resaw Fence1Lock Handle M8-1.25 x 441Moving Plate1Hex Bolts M8-1.25 x 901Hex Nut M8-1.251Phillips Head Screwdriver1US Dollar Bills2Hex Wrench 3mm1Hex Wrench 4mm1Tamaño: 4 MBPáginas: 28Language: EnglishManuales abiertas