Manual De UsuarioTabla de contenidosMaster TOC6Safety2Section A Installation7Section B Operation15Section C Accessories24Section D Maintenance37Section E Theory of Operation40Section F Troubleshooting & Repair45Symptoms48Major physical or electrical damage is evident when the sheet metal cover(s) are removed.48Machine is dead – no output – no fan – no pilot light.48The machine is dead – no output – no fan – the pilot light is lit.49The input contactor operates – the fan runs – the pilot light is lit – but the machine has no welding output.50The machine has high welding output and no control.51The machine has minimum welding output and no control.52The machine does not have maximum output.53The machine will not shut off when the power switch is put in the OFF position.54The Arc Control switch (S5) has no effect in CV (FCAW/GMAW) mode when welding with the short circuit transfer process.54The output terminals are always electrically “hot.”55Poor arc striking when using semi-automatic or automatic wire feeders.56Poor arc characteristics when welding in the constant voltage (CV) mode.57The Arc Force control (R5) has no effect on the arc.58The welding arc is variable and sluggish.58Section G Electrical Diagrams107Tamaño: 2 MBPáginas: 116Language: EnglishManuales abiertas