Manual De UsuarioTabla de contenidosMaterials Testing Machine (ME-8236)2Materials Testing System (ME-8230)2Comprehensive Materials Testing System (ME-8244)2Introduction2Included Equipment3Calibration Rod and Nut, Load Bar Round Nut, Safety Shields3Materials Testing System3Tensile Sample Information3Accessories3Replacement Items3About This Manual3Experiment Guide3Operation3Caution: Be sure to wear adequate eye protection when using the Materials Testing Machine or its accessories. Operate the Machine from behind a protective shield.3ME-8229 MTS Storage Base4Secure the Materials Testing Machine4Calibration Setup4Lab 02: Compliance Calibration Tutorial4Reason for Calibration4Creating the Compliance Calibration Information5Saving the Calibration Information5Mount the Calibration Rod for Tension5Mount the Calibration Rod for Compression5Attach the Safety Shields5Prepare to Record Calibration Data5See Appendix A for details of the Calibration Procedure.5After the Calibration Procedure is complete, return to this point.5Mount a Tensile Sample5Attach the Safety Shields6Record Data6Materials Bending Accessory (ME-8237)6Attach the Safety Shields6Apply a Force6Materials Coupon Adapter (ME-8238)6Attach the Safety Shields7Materials Shear Accessory (ME-8239)7Attach the Safety Shields8Materials Photoelasticity Accessory (ME-8241)8Materials Structure Beam Adapter (ME-8242)8Attach the Safety Shields9MTS Clevis Clip (ME-8245)9MTS 10 – 32 Adapter (ME-8246)9MTS Compression Accessory (ME-8247)9MTS Four-point Load Anvil (ME-8249)9Cast Beam Spares Kit (ME-6983)10Photoelastic I-Beams (ME-7011)10Thin I-Beams (ME-7012)10Maintenance10Specifications10Experiment Guide10Sample Labs11Technical Support11Product End of Life Disposal Instructions:11Appendix A: Calibration12General Information: Pre-Calibration12Lab 02: Compliance Calibration Tutorial12Optional: Change Sign12Calibration Procedure13Step One: Choose the Type of Measurement to Calibrate13Step Two: Choose Calibration Action13Step Three: Install the Calibration Rod15Step Four: Record a Smooth Data Run15Step Five: Polynomial Fit16Step Six: Name the Calibration.16Finishing Step16Appendix B: “Seating” a Test Sample and Setting a Pre-Load18“Seat” the Sample18Set a Pre-Load18Tamaño: 4 MBPáginas: 18Language: EnglishManuales abiertas