ProspectoTabla de contenidosInstallation Quick Start Guide for RMX 15001Basic Setup1VGA Slot11 Insert the power cable into the power connector on the rear panel of the RMX 1500.12 Connect the Media cable to LAN 2 port.13 Connect the network cables to the MNG (Signaling) port & MNGB (Management Network) port.14 (Optional.) Connect the Shelf Management cable to the Shelf port.15 (Optional.) Connect the E1/T1 cables to their PRI (1-4) ports.1E1/T1 PRI Connection(s)1Modifying the USB Key Settings11 Insert the USB key provided with your system into the PC workstation and double- click LanConfigUtility.exe to start the utility.12 Modify the parameters in the utility’s dialog box using the information supplied by your network administrator.13 Click OK.14 Remove it from the PC.1First-time Power-up and Connection to MCU11 Insert the USB key containing the modified IP addresses in the USB port on the RMX’s front panel.12 Power the RMX ON.13 Remove the USB key.16 .1Modifying the Default IP Service26 In the IP Network Service creation confirmation, click OK.28 Click Save & Close.29 In the Success Message box confirming successful configuration, click OK.210 In the Reset Confirmation dialog box, click Yes.211 In the Please wait for system reset message box, click OK. System restart may take up to five minutes.212 Refresh the browser periodically until the Login screen is displayed and Login. In the Main Screen an MCU State indicator displays the time remaining until the system start-up is complete.213 Create a new User with Administrator permissions and delete the default User (POLYCOM). For system security reasons, only when this step is completed and if there are no System Errors, the system is fully configured and the green RDY LED on the CN...2Connecting to a Conference Directly or via Entry Queue (EQ)2H.323 Participants2SIP Participants2ISDN and PSTN Participants2Conference Control Using DTMF Codes2RMX® 15001RMX® 15002Tamaño: 400 KBPáginas: 2Language: EnglishManuales abiertas