Manual De UsuarioTabla de contenidosPreface3Contents4Terminology71. Precautions for Safety91.1 Safety Symbols and Meanings102. Preparation212.1 Package Components222.2 Other Tool Products Required for Development222.3 Name of Each Part23(1) System Configuration23(2) Inside of the Emulation Pod242.4 When Using This Product for the First Time25(1) Making an MCU File25(2) Setting the Work Area25(3) Downloading Firmware26(4) Self-check263. Setting Up273.1 Removing and Closing the Upper Cover283.2 Each Setting293.3 Selecting Clock Supply and Replacing Oscillator Circuit Boards30(1) Clock Supply to the MCU30(2) Using the Oscillator Circuit on the Target System31(3) Changing the Internal Oscillator Circuit of the Emulation Pod32(4) Replacing Oscillator Circuit Boards333.4 Switch Settings34(1) Toggle Switches SW1 to SW5 on the M30620T3-PRT Board (MCU-dependent 1)34(2) Jumper Switches JP1 and JP2 on the M30620T3-PRT Board (MCU-dependent 1)363.5 Installing and Removing Pullup Resistors373.6 A-D Conversion Bypass Capacitors383.7 Connecting the PC470139(1) Connecting the Cable to the PC470139(2) Connecting the Cable to the Emulation Pod403.8 Connecting the Target System41(1) Connecting to a 100-pin LCC Socket42(2) Connecting to an 80-pin 0.65-mm-pitch Foot Pattern (Part 1)43(3) Connecting to an 80-pin 0.65-mm-pitch Foot Pattern (Part 2)44(4) Connecting to a 100-pin 0.65-mm-pitch Foot Pattern (Part 1)45(5) Connecting to a 100-pin 0.65-mm-pitch Foot Pattern (Part 2)46(6) Connecting to a 100-pin 0.65-mm-pitch Foot Pattern (Part 3)47(7) Connecting to a 100-pin 0.5-mm-pitch Foot Pattern (Part 1)48(8) Connecting to a 100-pin 0.5-mm-pitch Foot Pattern (Part 2)49(9) Connecting to a 100-pin 0.5-mm-pitch Foot Pattern (Part 3)50(10) Connecting to a 100-pin 0.4-mm-pitch Foot Pattern514. Usage534.1 Turning On the Power54(1) Checking Connections of the Emulator System54(2) Turning ON/OFF the Power54(3) LED Display When the PC4701 Starts Up Normally554.2 Downloading Firmware56(1) When It is Necessary to Download Firmware56(2) Downloading Firmware in Maintenance Mode564.3 Self-check57(1) Self-check Procedure57(2) If an Error is Detected in the Self-check575. Specifications595.1 Specifications605.2 Operation Timing in Memory Expansion and Microprocessor Modes61(1) Separate Bus, No-Wait61(2) Separate Bus, With Wait, Accessing External Memory Area63(3) Multiplex Bus Timing65(4) Timing Requirements675.3 Connection Diagram685.4 External Dimensions70(1) External Dimensions of the Emulation Pod70(2) External Dimensions of the Converter Board M30800T-PTC71(3) External Dimensions of the Converter Board M3T-F160-100NSD72(4) External Dimensions of the Converter Board M3T-F160-100NSE726. Troubleshooting736.1 Flowchart to Remedy the Troubles746.2 When the Emulator Debugger Does Not Start Up Properly75(1) When the LED Display of the PC4701 is Abnormal75(2) Program Window is Not Displayed at Debugger Startup (Target Connected)76(3) Program Window is Not Displayed at Debugger Startup (Target Not Connected)776.3 How to Request for Support777. Maintenance and Guarantee797.1 Maintenance807.2 Guarantee807.3 Repair Provisions807.4 How to Request for Repair81Tamaño: 800 KBPáginas: 84Language: EnglishManuales abiertas