Manual De UsuarioTabla de contenidosPreface3Contents41. Precautions for Safety71.1 Safety Symbols and Meanings82. Preparation172.1 Terminology182.2 Package Components192.3 Other Tool Products Required for Development192.4 Name of Each Part20(1) System Configuration20(2) Inside of Emulation Pod212.5 When Using the Emulator for the First Time223. Setting Up233.1 Removing the Upper Cover243.2 Switch Settings253.3 Selecting Clock Supply29(1) Using the Oscillator Circuit on the Target System30(2) Changing the Internal Oscillator Circuit of Emulation Pod31(3) Replacing the Oscillator Circuit Boards323.4 A-D Conversion Bypass Capacitor333.5 Connecting the PC4701 and Emulation Pod34(1) Connecting the Cable to the PC470134(2) Connecting the Cable to the Emulation Pod353.6 Connecting the Target System36(1) Connecting 100-pin LCC Socket37(2) Connecting 100-pin 0.65-mm-pitch Foot Pattern (Part 1)38(3) Connecting 100-pin 0.65-mm-pitch Foot Pattern (Part 2)39(4) Connecting 100-pin 0.65-mm-pitch Foot Pattern (Part 3)40(5) Connecting 100-pin 0.5-mm-pitch Foot Pattern (Part 1)41(6) Connecting 100-pin 0.5-mm-pitch Foot Pattern (Part 2)42(7) Connecting 144-pin 0.5-mm-pitch Foot Pattern434. Usage454.1 Turning On the Power Supply46(1) Checking the Connection of the System46(2) Turning On the Power Supply46(3) LED Display When PC4701 Starts Up Normally474.2 Downloading Firmware48(1) When It is Necessary to Download Firmware48(2) Downloading Firmware in Maintenance Mode484.3 Starting Up the Emulator Debugger (Setting EMEM Dialog)49(1) Setting the Debug Monitor Bank Address49(2) Selecting the Processor Mode50(3) Setting the Emulation Memory50(4) Emulation Memory Allocation as Expansion Area50(5) Referring MCU STATUS524.4 Self-check53(1) Self-check Procedure53(2) If an Error is Detected in the Self-check535. Specifications555.1 Specifications565.2 Connection Diagram575.3 Operation Timing in Memory Expansion Mode and Microprocessor Mode59(1) Timing Requirements595.4 Electrical Characteristics595.5 External Dimensions60(1) External Dimensions of Emulation Pod60(2) External Dimensions of Converter Board (M30800T-PTC)61(3) External Dimensions of Converter Board (FLX-144NSD)626. Troubleshooting636.1 Flowchart to Remedy the Troubles646.2 When the Emulator Debugger Does Not Start Up Properly65(1) When the LED Display of PC4701 is Abnormal65(2) EMEM Dialog is Not Displayed When the Emulator Debugger Starts Up (When the target system is connected)66(3) EMEM Dialog is Not Displayed When the Emulator Debugger Starts Up (When the target system is not connected)67(4) Errors Occur When the Emulator Debugger Starts Up (When the target system is connected)676.3 Operation Differs from That of Actual MCUs67(1) When the A-D Conversion Values are Different from Expected Values677. Maintenance and Guarantee697.1 Maintenance707.2 Guarantee707.3 Repair Provisions707.4 How to Request for Repair71Tamaño: 700 KBPáginas: 74Language: EnglishManuales abiertas