Manual De UsuarioTabla de contenidos1. Important32. Precautions for Safety52.1 Definitions of symbols52.2 Warnings62.3 Cautions73. Specification84. Features95. Components Names and Functions106. Operations116.1 Setup116.1.1 How to install battery111. Remove the four screws (red circled in the picture) at the four corners of the bottom plate using a Phillips head screw driver.112. Detach the bottom plate from the main body. Do not lose the screws.113. Install batteries to battery socket. Do not mistake the battery electrodes.124. Tighten the four screws at the four corners of the bottom plate.126.1.2 Unlock HOLD Switch131. Unlock the HOLD switch by sliding it to the left.136.1.3 Check LCD Displays131. Make sure the LCD displays the following items in the correct format.136.2 Menu Functions141. When the USB is not connected, display the menu in the LCD by pressing both Left and Right buttons simultaneously.142. Select the desired function by moving the joystick up and down.143. Select the desired item by pressing the Left button. To return to the initial screen, press the Right button.146.2.1 Software Version Display151. The LCD displays the software version as follows.156.2.2 Time Settings151. Select the year by moving the joystick up and down (00 to 99).152. Press the Left button to enter setting.153. Select the month by moving the joystick up and down (01 to 12).154. Press the Left button to enter setting.155. Select the date by moving the joystick up and down (01 to 31).156. Press the Left Button to enter setting.157. Select the hour by moving the joystick up and down (00 to 23).158. Press the Left button to enter setting.159. Select the minutes by moving the joystick up and down (00 to 59).1510. Press the Left button to enter setting.156.2.3 Formatting EEPROM161. Select "YES" or "NO" by moving the joystick up and down.162. To format the built-in EEPROM, press the Left button to select "YES". This will clear the data log and delete all the written files.166.3 Charging Battery171. Connect the USB Micro-B connector to a PC or USB charger via the USB cable included in this product.172. The charge automatically stops when the USB cable is disconnected or the battery is charged to 100%.176.4 Supplying Power181. Connect the USB Standard-A connector to a USB device via the USB cable included in this product.182. This product automatically stops supplying power when the USB cable is disconnected or the battery voltage level is too low (2900mV).186.5 USB Composite Devices (USB mouse + USB memory)191. Start up the PC.192. Connect the USB Micro-B connector to a PC via the USB cable included in this product.193. Open the CSV file storing the sponsor data with a PC application.206.6 Android Open Accessory216.6.1 Starting the Demokit Application211. Start up the Android device that has been installed with the Demokit Application.212. Connect the USB Standard-A connector to the USB Micro-B connector of the Android device via the USB cable included this product.213. This product will be recognized as an Android accessory and the Demokit Application will start automatically.216.6.2 Demokit Application Operations211. Data transmission from this product to the Android device21- B1 and B2 button icons in the Demokit Application start blinking.222. Receiving data from Android device22- This product’s LCD backlight turns ON/OFF.226.7 Power-saving Function22Website and Support23Revision Record24General Precautions in the Handling of MPU/MCU Products25Tamaño: 1 MBPáginas: 26Language: EnglishManuales abiertas