SATO MB400i Manuales de usuario

Tabla de contenidos

• 00_MB400i_MB410i_Quick_Guide_D _6_5X4_6_Inch_Cover_SAI

  1
• 001 MB400i MB410i QG Copyright SAI EN

  2
• MB400i 410i QG DTOC SAI EN

  3
• 02 Safety chap1 SAI EN

  5
  • Preface

    5
  • For the Bluetooth or wireless LAN options

    5
  • 1. Safety Precautions

    7
    • Markings and Symbols

      7
  • Warning

    7
  • Caution

    7
  • Warning

    10
• 03 Unpacking chap2 SAI EN

  16
  • 2. Unpacking

    16
• 04 Names of Parts chap3 SAI EN

  17
  • 3. Names of Parts

    17
    • Names and Functions of Operating Parts

      19
• 05 Preparing for chap4 SAI EN

  21
  • 4. Preparing for First-time Operation

    21
    • Charging the Battery Pack

      21
      • 1. Connect the power cord to the charger unit, then plug it into the

        21
      • 2. Insert the battery pack into the slot, with the terminal pointing downward.

        22
      • 3. Remove the battery pack when charging is complete.

        22
      • Charging time

        22
        • 1. Remove the DC input terminal cover, and insert the DC output

          23
        • 2. Plug the AC adapter into the outlet.

          23
      • Charging time

        23
    • Installing and Removing the Battery Pack

      24
      • 1. Open the battery cover.

        24
      • 2. While pressing the gray hook, insert the battery pack, then

        24
      • 3. To remove the battery, press the gray hook to unlock it, then hold

        24
    • Using the AC Adapter

      25
    • Loading Labels

      27
      • Continuous Printing Mode

        27
        • 1. Slide the cover release lever in the arrow direction to open the

          28
        • 2. While pressing the label guide stopper, slide the label guide to the label size to be used.

          28
        • 3. Load the paper in the printer. Make sure the roll is oriented correctly.

          29
        • 4. Confirm that the label roll can be rotated easily by hand.

          29
        • 5. Check that the label tip is protruding. Then close the main

          29
      • Dispense mode printing

        30
        • 1. Slide the cover release lever in the arrow direction to open the cover. First, slide the dispenser unit to the continuous printing mode position. (See Switching from Dispense mode printing to Continuous printing mode, in this section, Preparing fo...

          31
        • 2. While pressing the label guide stopper, slide the label guide to the label size to be used.

          31
        • 3. Peel the label at the tip of the label paper.

          32
        • 4. Load the paper in the printer. Make sure the roll is oriented correctly.

          32
        • 5. Confirm that the label roll can be rotated easily by hand. If rotation is labored, this can cause a feed error. Remove the label roll and adjust the label guide. Note that the label guides do not require adjustment when using labels with the same ...

          33
        • 6. Check that the label tip is protruding (10 mm or more). Then close the main cover by pressing the middle of the cover. Close the main cover slowly, while pulling the cover release lever.

          33
        • 7. For linerless labels with perforation, pull the label upward to tear along the perforated line. Ensure that the tear-off edge is just at the beginning of the red platen roller. Otherwise, re-load the label.

          34
        • 8. Slide the dispenser unit until it stops. If the linerless label clogs at the dispenser, clear the label and re-load the label.

          34
• 06 Turning chap5 SAI EN

  35
  • 5. Turning the Power On

    35
    • Power ON

      35
      • 1. Hold down the POWER button until the STATUS LED lights green. Then release the POWER button.

        35
    • Power OFF

      35
      • 2. Hold down the POWER button again, until the STATUS LED turns off. Then release the POWER button.

        35
• 07 Test chap6 SAI EN

  36
  • 6. Test Printing

    36
    • 1. When pressing the FEED button and holding down the POWER button simultaneously, the printer enters the test mode. Press the FEED button again to start test printing.

      36
    • 2. Verify the following using the output of the test print.

      36
• 08 Op RS232C chap7 SAI EN

  37
  • 7. Operation with an RS-232C Cable

    37
    • 1. Remove the USB/DIP switch cover, and set the DIP switch (DSW) to DSW-1, 2, 3, 4 = (OFF, OFF, OFF, OFF).

      37
    • 2. Remove the RS-232C connector cover.

      37
    • 3. Insert the RS-232C cable into the connector.

      37
    • 4. Connect the other end of the RS-232C cable to the connector on the PC or the handheld terminal.

      37
• 09 Op USB chap8 SAI EN

  38
  • 8. Operation with a USB Cable

    38
    • 1. Remove the USB/DIP switch cover, and set the DIP switch (DSW) to DSW-1, 2, 3, 4 = (ON, ON, OFF, OFF).

      38
    • 2. Insert the USB cable in the connector.

      39
    • 3. Connect the other end of the USB cable to the connector on the PC or the handheld terminal.

      39
• 10 Op Infrared chap9 SAI EN

  40
  • 9. Operation via Infrared Communication

    40
    • 1. Remove the USB/DIP switch cover, and set the DIP switch (DSW) to DSW-1, 2, 3, 4 = (ON, OFF, OFF, OFF).

      40
    • 2. Place the printer within 8 inches (20 cm) of the PC or handheld terminal for infrared communication.

      40
    • 3. Adjust the printer position so that the PC or handheld terminal is within a 30° area vertically and horizontally (cone shape) from the center of the

      41
• 11 Op Bluetooth chap10 SAI EN

  42
  • 10. Operation with Bluetooth or Wireless LAN

    42
    • 1. Remove the USB/DIP switch cover, and set the DIP switch (DSW) to DSW-1, 2, 3, 4 = (OFF, ON, OFF, OFF).

      42
• 12 Rem Labels chap11 SAI EN

  43
  • 11. Removing printed labels

    43
    • 1. Data is sent from a PC.

      43
    • 2. When printing is complete, hold the right or left corner of the label, pull it in the direction of the arrow, and tear the label.

      43
    • When the next label is not printed

      44
      • 1. With the printer online, press the PRINT button to take the printer offline (STATUS LED turns off).

        44
      • 2. Press the FEED button to feed the labels.

        44
      • 3. When the paper stops, pull it in the direction of the arrow to cut the label.

        44
      • 4. Press the PRINT button to put the printer online (STATUS LED lights green).

        44
• 13 Troubleshooting chap12 SAI EN

  45
  • 12. Troubleshooting

    45
    • When printing fails (automatic printing)

      48
      • 1. Operation using manual printing

        48
      • 2. Operate using operation 2 for the dispenser operation

        48
• 14 Daily Care chap13 SAI EN

  50
  • 13. Daily Care

    50
    • Caring for the thermal head

      50
      • 1. Slide the cover release lever to open the cover.

        50
      • 2. Wipe off any smudges with a cloth dipped in alcohol.

        50
    • Caring for the platen/dispenser roller/paper sensor

      51
      • 1. Slide the cover release lever to open the main cover.

        51
      • 2. Wipe off any smudges with a cloth dipped in alcohol. Do not use thinner, benzene, or kerosene.

        51
• 15 Reference chap14 SAI EN

  52
  • 14. Reference

    52
    • Included Items

      52
      • 1. Thread the shoulder belt through the belt holes on the printer, from the outside to the inside.

        52
      • 2. Thread the end of the shoulder belt through the buckle, and adjust the length. If the belt is not routed correctly, the belt may detach and the printer may drop.

        52
    • Options

      52
      • 1. Open the cover and place the printer in it with the operating parts facing up.

        54
      • 2. Place the lower side in the case so that the printer is completely

        54
      • 3. Close the cover.

        54
      • 4. Affix the rain-resistant cover to the Waist case with the buttons and set in place.

        55
      • 5. Attach the shoulder strap to the case.

        55
      • 1. Open the cover and place the printer in it with the operating parts facing up.

        55
      • 2. Place the lower side in the case so that the printer is completely in the case.

        56
      • 3. Close the Waist case cover.

        56
      • 4. Run a belt through the Waist case loops.

        56
    • Operation Modes

      57
    • DIP Switch

      65
      • 1. Turn the power OFF.

        65
      • 2. Open the DIP switch cover.

        65
      • 3. Use a pointed object, such as the tip of a ballpoint pen, to change the switch position.

        65
    • Basic Specifications of MB400i/MB410i

      67
• 16 Contact chap15 SAI EN

  71
  • 15. SATO Contacts

    71