Manual De UsuarioTabla de contenidosSeagate® NAS HDD11.0 Introduction91.1 About the SATA interface92.0 Drive Specifications112.1 Specification summary tables112.2 Formatted capacity132.2.1 LBA mode132.3 Default logical geometry132.4 Recording and interface technology142.5 Physical characteristics142.6 Seek time152.7 Start/stop times152.8 Power specifications152.8.1 Power consumption152.8.2 Conducted noise162.8.3 Voltage tolerance162.8.4 Power-management modes172.9 Environmental specifications172.9.1 Drive case temperature172.9.2 Ambient Temperature182.9.3 Temperature gradient182.9.4 Humidity182.9.5 Altitude182.9.6 Shock182.9.7 Non-operating vibration192.10 Acoustics192.10.1 Test for Prominent Discrete Tones (PDTs)192.11 Electromagnetic immunity192.12 Reliability - Mean Time Between Failure202.13 Warranty202.14 Agency certification202.14.1 Safety certification202.14.2 Electromagnetic compatibility202.14.3 FCC verification212.15 Environmental protection212.15.1 European Union Restriction of Hazardous Substances (RoHS) Directive212.15.2 China Restriction of Hazardous Substances (RoHS) Directive222.16 Corrosive environment223.0 Configuring and Mounting the Drive233.1 Handling and static-discharge precautions233.2 Configuring the drive233.3 SATA cables and connectors233.4 Drive mounting244.0 SATA Interface254.1 Hot-Plug compatibility254.2 SATA device plug connector pin definitions254.3 Supported ATA commands264.3.1 Identify Device command294.3.2 Set Features command334.3.3 S.M.A.R.T. commands34Tamaño: 200 KBPáginas: 40Language: EnglishManuales abiertas