Spectra Watermakers EVO48 Manuales de usuario

Tabla de contenidos

• 1. See “LED Feedback” on page 1

  2
• 2. 25-Pin Parallel Port: Connect the Printer Module’s 25-pin parallel port to any dot matrix printer. Note: The dot matrix printer must support a minimum of 80 columns.

  2
• 3. 9-Pin Serial Port: Connect the Printer Module’s 9-Pin serial port to a dot matrix printer. Note: The dot matrix printer must support a minimum of 80 columns.

  2
• 4. 9-pin Serial Port: Connect the Printer Module’s 9-pin serial port to a home automation module.

  2
• 5. 9-pin Serial Port: Connect C-Bus to the Printer Module using a null modem cable.

  2
• 6. 9-pin Serial Port: Connect either the Printer Module’s USB or 9-pin serial port to a computer’s COM port to view the control ...

  2
  • 1. Hold [0] key + [installer code]

    1
• 2. Enter section [953] (DGP-848) [4003] (EVO)

  1
• 3. Enter module’s 8-digit [serial number]

  1
• 4. Enter [section] and enter the required [data]

  1
  • 1. Press the [enter] key

    1
• 2. Enter the [installer code]

  1
• 3. Enter 3-digit [section] you wish to program

  1
• 4. Enter the required [data]

  1
• EVO Sections

  1
• Spectra Sections

  1
• EVO Sections

  1
• Spectra Sections

  1
  • 1. Click Start (from the Windows® taskbar) a Programs a Accessories a Communications a HyperTerminal®. The Connection Description window is displayed.

    1
  • 2. Enter a name in the Name text box and select an icon for your connection file. Click OK. The Connect To window is displayed.

    1
  • 3. From the Connect Using drop-down list select the COM port connected to the Printer Module. Click OK. The COM Properties window is displayed.

    1
  • 4. Click on the Bits per second drop-down list and select the baud rate that is set in the Printer Module (Section [016] Options [2] & [3]). By default, HyperTerminal® sets the Data bits at 8, the Parity at None and the Stop bits at 1. Click OK.

    1
  • 5. The HyperTerminal® display will appear already connected to the Printer Module. Click on the Properties icon (or select Prope...

    1
  • Introduction

    1
  • Home Automation Interface Capabilities

    1
  • Technical Specifications

    1
  • Printer Requirements

    1
  • LED Feedback

    1