Star Trac 7060 Manuel D’Utilisation

Page 18 

                                                         SPINNER

®

 OWNER’S GUIDE 

 
Position the handlebar at the same height as your seat, or higher if you feel any discomfort in your back. All Sp inner

®

 indoor cycling bikes allow for 

adjustment of handlebar height. Additionally, the Spinner

V allows for fore and aft adjustment of the handlebar. 

 

 V  

Loosen the handlebar height tension handle by turning the handle counterclockwise. Raise or lower the handlebar to the desired height, then tighten the 
tension handle by turning clockwise. Be sure to tighten firmly. 

Turn the handlebar height pop -pin counterclockwise and pull out on the pin to release it from its current preset location.  Raise or lower the handlebar 
to the desired height, then gently release the pop -pin.  Raise or lower the handlebar slightly, if necessary, until the pop -pin engages a preset hole. Turn 
the pop -pin clockwise to secure. 

 Spinner

Loosen the handlebar fore-and-aft tension handle by turning the handle counterclockwise. Move the handlebar forward or back to the desired position, 
then tighten the tension handle by turning clockwise. Be sure to tighten the handle firmly. 
 

 

 

   

Place the balls of your feet securely in the toe cages, with the ball of the   

   foot (or the widest part of your shoe) over the center of the pedals. As   
   you pedal, concentrate on keeping feet flat, which enables a more  
   powerful pedal stroke. The front of the shoe may not completely fill the  
   toe cage. 

 

Note: The pedal straps should be adjusted to hold the foot snugly in the 
pedal. 

V Handlebar Fore / Aft 
Tension Handle 

V Handlebar Height 
Tension Handle 

Pro / Elite 
Handlebar Height 
Pop-Pin 

NXT Handlebar 
Height Pop-Pin 

Tightening 
Clip