Impex MD-823 Manuel D’Utilisation

Tools required for assembling the Machine:  Two Adjustable Wrenches and Allen 
Wrenches. 
NOTE:  It is strongly recommended that two or more people assemble this machine to 
avoid possible injury. 
STEP 1     (See Diagram 1) 
A.) 

B.) Attach the Left Upright Beam (#1) to a Rear Base Frame (#14). Secure it with one M10 x 4 ½” 

Allen Bolt (#62), one Ø ¾” Washer (#70), and one M10 Aircraft Nut (#68). 

C.) Attach Left Diagonal Support (#15) to Left Upright Beam and the Rear Base. Secure each end 

with one M10 x 3” Allen Bolt (#60), two Ø ¾” Washers (#70), and one M10 Aircraft Nut (#68). 

D.) Repeat B & C above to install Right Upright Beam (#2), Right Diagonal Support (#16), and the 

other Rear Base together. 

E.) Connect the Left and Right Upright Beams with a Cross Brace (#3) in the mid-span. Secure 

each end with two M10 x 4 ¾” Carriage Bolts (#66), one 4 ¾” x 2” Bracket (#26), two Ø ¾” 
Washers (#70), and two M10 Aircraft Nuts (#68).