Pioneer VSX-39TX Manuel D’Utilisation
37
SET
UP
Initial Set Up
1
Press the CHANNEL LEVEL button.
The CHANNEL LEVEL settings will appear on your remote
control screen.
NOTE : Be prepared! The test tone is output at a high
volume level.
MASTER VOLUME rotates to the reference position (0 dB)
and the display on the receiver flashes TEST TONE. After a
few seconds the test tone is output.
These settings will be displayed on your TV.
control screen.
NOTE : Be prepared! The test tone is output at a high
volume level.
MASTER VOLUME rotates to the reference position (0 dB)
and the display on the receiver flashes TEST TONE. After a
few seconds the test tone is output.
These settings will be displayed on your TV.
2
Select a test tone mode by pressing one
of the TEST TONE buttons. Output the
TEST TONE.
of the TEST TONE buttons. Output the
TEST TONE.
dB
STEREO
SIGNAL
SELECT
ANALOG SP
ANALOG SP
A
AUTO
VOLUME
AUTO (automatic TEST TONE)
This mode switches the test tone between each speaker
automatically. The automatic test tone is output in the
following order :
This mode switches the test tone between each speaker
automatically. The automatic test tone is output in the
following order :
FL
CT
FR
SR
SBL
SBR
SL
SW
MANUAL (manual TEST TONE)
This mode lets you switch the test tone between each
speaker manually.
This mode lets you switch the test tone between each
speaker manually.
0.0
dB
0.0
dB
FL
CT
0.0
dB
FR
0.0
dB
SW
0.0
dB
SL
0.0
dB
SBL
0.0
dB
SBR
0.0
dB
SR
Any time you want to exit the process
Press SETUP OK.
Press SETUP OK.
CHANNEL LEVEL
The following steps show you how to balance the sound output level of your speakers. Proper speaker balance
is essential for obtaining high quality surround sound. If continuing from CHANNEL DELAY go to step 1. If
starting fresh, complete steps 1-3 in “Setting Up for Surround Sound“ (p.32) first.
is essential for obtaining high quality surround sound. If continuing from CHANNEL DELAY go to step 1. If
starting fresh, complete steps 1-3 in “Setting Up for Surround Sound“ (p.32) first.
memo
1
System Setup
SPEAKER
SETTING
CROSSOVER
NETWORK
BASS PEAK LEVEL
MANAGER
DYNAMIC RANGE
CONTROL
DIGITAL INPUT
SELECT
MULTI ROOM
CHANNEL DELAY
CHANNEL LEVEL
BACK
2
• Be careful, if you touch one of the speaker buttons
by accident the TEST TONE will automatically sound
from each speaker.
from each speaker.
• If your subwoofer has a volume control, set it to the
middle position before doing these operations.
• A test tone
will be output from the SURROUND BACK
speakers but your external amplifier must be turned
up at least a little in order to hear it. Be careful that it
is not turned up too much because the test tone vol-
ume is quite loud.
up at least a little in order to hear it. Be careful that it
is not turned up too much because the test tone vol-
ume is quite loud.