Impex PL 10510 Manuel D’Utilisation

STEP 2 (See Diagram 2)  
A.) Insert the Axle (# 4) into the Pivot on the Main Frame (#1).  Attach the Left and Right 

Handlebars (#2) & (#31) onto the Axle from both sides.  Secure the Axle with two 

∅

 

7/8” Washers (#7) and M8 Nylon Nuts (#8).  Close both ends with two plastic Axle End 
Caps (#9).  

B.) Insert the Lower Handlebar (#3) into the Left Handlebar (#2).  Secure it with two M6 x 

5/8” Allen Bolts (#6) and 

∅

½” Washers (#5). Repeat same procedure to install the 

other side.