Stamina Products 50-0220 Manuel D’Utilisation

The safety and integrity designed into the 

BioFLEX 2200 can only be maintained when the BioFLEX 

2200 is regularly examined for damage and wear. Special attention should be given to the following:

1.  Verify  that  the 

WARNING  LABEL(72)  and LAT  BAR  WARNING  LABEL(73) are  in  place  and 

easy to read. Call  Stamina Products immediately  at 

1-800-375-7520 for a replacement WARNING 

LABEL(72) if it is missing or damaged.

2.  It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.

3.  Worn or damaged components shall be replaced immediately or the 

BioFLEX 2200 removed from 

service until repair is made.

4.  Verify that the Cables are properly installed on all Pulleys.

5.  Check the condition of the Cables. Replace the Cables if the plastic coatings are cracked or broken.

6.  Check the Tension Cords for wear. Replace Tension Cords that are frayed or worn.

7.  Check the plastic hooks on the both ends of all Tension Cords. Replace Tension Cords with deformed 

or damaged hooks.

8.  Check the pulleys for excessive wear. Replace worn pulleys.

9.  Only Stamina Products supplied components shall be used to maintain/repair the 

10. Keep your 

BioFLEX 2200 clean by wiping it off with an absorbent cloth after use.

1.  To store the 

BioFLEX 2200, simply keep it in a clean dry place.

2.  To move the 

BioFLEX 2200, hold the upright of the BioFLEX 2200 while you tip it backward. When 

the 

WHEELS(32) come in contact with the floor you can easily roll the BioFLEX 2200.