Roland CD-2e Manuel D’Utilisation
Tuning Your Instrument (Tuner Function)
(continued)
101
Advanced Uses
Recording
Listening
Deleting
Creating a CD
Editing an SD
Appendices
Convenient
Functions
Information
/
Display
Checkin
g
/
Preparations
5
When you’re finished using the tuner, press the [EXIT] button twice.
You’re returned to the audio source screen.
You can calibrate the CD-2e’s Tuner to another instrument or tuning standard by
adjusting its “reference pitch.”
adjusting its “reference pitch.”
The reference pitch is the frequency of the A4 note. This is the pitch of the middle A note
on a piano.
on a piano.
1
Press the [MENU] button to access the menu screen, and choose “Tuner/
Tone?”
Tone?”
fig.menu-tuner01-e.eps
Press the [MENU] button to access the menu screen.
Use the [
] [
] buttons to choose “Tuner/Tone?”
Press the [ENTER] button to confirm your choice.
2
Use the [+] [-] buttons to adjust the reference pitch as desired.
fig.menu-tuner06-e.eps
3
Press the [EXIT] button twice.
You’re returned to the audio source screen.
Changing the Tuner’s Reference Pitch
Value (units: Hz)
Explanation
435–440 (factory setting)–445
Decreasing this value will lower the pitch. Increasing this value
will raise the pitch.
will raise the pitch.
●
The tuner can also use an external mic. If you want to use an external mic, set the [MIC
SELECT] switch to the “EXT” (external mic) position.
SELECT] switch to the “EXT” (external mic) position.
●
You can’t play back or record while using the tuner.
●
If you don’t want to hear sound while you’re tuning, you can turn down the [VOLUME]
knob or set the [SPEAKER] switch located on the back of the CD-2e to the “OFF” position
so that the sound is muted.
knob or set the [SPEAKER] switch located on the back of the CD-2e to the “OFF” position
so that the sound is muted.
Important
Reference pitch
CD-2e_e.book 101 ページ ２００７年９月１０日 月曜日 午後８時５７分