Panasonic PV C923 Manuel D’Utilisation

Page de 40
26
Check the following chart before requesting service.
Try another channel.
Check picture control adjustments.
Check for source of reception
disturbance.
Check CATV connection or VHF/
UHF antenna, reposition or rotate
antenna.
Try another channel.
Check picture control adjustments.
Check for source of reception
disturbance.
Check CATV connection or VHF/
UHF antenna, reposition or rotate
antenna.
Try another channel.
Check CATV connection or VHF/
UHF antenna, reposition or rotate
antenna.
Try another channel.
Check all CATV connections.
Set the TV/CATV Menu option to
the CATV mode.
Contact your Cable TV company.
Make sure TV/CATV menu option is
in the appropriate mode.
Check UHF antenna.
Try another channel.
Check CATV connection or VHF/
UHF antenna, reposition or rotate
antenna.
Check for source of reception
disturbance.
Check that MUTE button has not
been pressed.
TV station experiencing problems.
Picture control is not adjusted.
Possible local interference.
Antenna (CATV) connector is not
connected or possible
localinterference.
TV station experiencing problems.
Picture control is not adjusted.
Possible local interference.
Antenna (CATV) connector is not
connected or possible local
interference.
TV station experiencing problems.
Antenna (CATV) connector is not
connected or possible local
interference.
Cable TV channel is scrambled.
CATV connector is not connected.
TV/CATV Mode menu option is set to
the TV mode.
Cable TV service interrupted.
TV/CATV Mode menu option is not
set to the appropriate mode.
UHF antenna is not connected.
TV station experiencing problems.
Antenna (CATV) connector is not
connected or possible local
interference.
Possible local interference.
MUTE button is depressed.
Poor or no sound.
No reception above
channel 13.
No CATV reception.
Picture wobbles or drifts.
Poor or no color.
Poor or no picture.
25
25
25
15
POWER
TV BROADCAST RECEPTION
SYMPTOM
CAUSE
POSSIBLE SOLUTION
PAGE
14
19
11,12
14
19
11,12
14
11,12
14
12
16
12
16
11, 12
14
11
The AC power cord is not connected.
The DC car cord is not plugged into
the cigarette lighter socket.
The DC car cord fuse is blown.
Cassette is not inserted.
PROG TIMER button is depressed.
Moisture condenses on the video
heads.
Connect the AC power cord to the
AC outlet.
Connect the DC car cord to the
cigarette lighter socket.
Replace fuse.
Insert a video cassette.
Press the PROG TIMER button.
"DEW" appears on the screen. Wait
two or three hours until it goes off.
No power.
10
5
10
11
20
22
Although the power is on,
the TV/VCR does not
operate.
TROUBLESHOOTING GUIDE
 5B02301A E P20-Back
4/2/03, 3:37 PM
26