Samsung NBNH Manuel D’Utilisation
34
Using "PCoIP"
2
2 Using "PCoIP"
2.4.4
Configuration Window
The
Configuration
option on the Administrative Web Interface and OSD lets you configure various
settings for the device.
The tabs in the
Configuration
window are:
Each tab has the following buttons:
OK
,
Cancel
, and
Apply
. These buttons allow the administrator to
accept or cancel the changes made.
The
OSD
configuration options are a subset of the options available in the Administrative Web Interface.
To make changes to the configuration settings, you will need an administrator password. You do not
need a password to view the
Diagnostic
and
Information
menus. Applicable only when the
Password
item is available.
Network Tab
You can configure the host and client network settings from the
Initial Setup
page or
Network
page.
After you update the parameters on this page, click
Apply
to save your changes.
The Network parameters can also be configured using the Administrative Web Interface.
Figure 2-5:
Network
Configuration
z
Enable DHCP
When
Enable DHCP
is enabled, the device will contact a DHCP server to be assigned an IP
address, subnet mask, gateway IP address and DNS servers. When disabled, the device requires
these parameters to be set manually.
z
Network
z
IPv6
z
Label
z
Discovery
z
Session
z
Language
z
OSD
z
Display
z
Reset