Unitron Hearing Aid UMIC Manuel D’Utilisation

15

14

Setting the uMic volume

To change the uMic volume:
1.   Speak into the uMic from a 20 cm (8”) 

distance.

2.  Use the volume (

) buttons 

to set the uMic volume to a 
comfortable volume level.

If your hearing aids pick up too much ambient 
noise, use the following 2 steps to give the uMic 
more focus:
1.   Reduce the hearing aid volume by 

pressing the uDirect 2 

( )

 button.

2.   Then increase the uMic volume by 

pressing the uMic ( ) button.

   The uMic volume setting will be 

stored even when switching off the uMic.

   Your hearing healthcare professional can 

change the level of the hearing aid microphones 
while using the uMic to adjust the volume of 
sounds around you.

Functional test of uMic

Before using the system, perform 
a quick functional test by gently 
tapping on the microphone 
opening.
You should clearly hear the tapping noise in 
your hearing aids.

   Line of sight between the uMic and the streamer 

is usually not required. If the audio transmission 
ends abruptly, refer to the troubleshooting 
guide.