Pelco TW3004AR Manuel D’Utilisation
6
C1667M (6/06)
PARTS OF THE RECEIVER
v
Figure 1.
TW3004AR Parts
Rubber Feet (4):
For placing unit on a flat surface, such as a desk or shelf.
Status LEDs (4):
Light red when there is no UTP video being received. Light green when there
is UTP video being received. Flash amber when Coaxitron pan/tilt/zoom (PTZ) control
commands are being received.
commands are being received.
Pelco Badge:
Lights blue to indicate power when using either the 4-pin rack power connector
or the 2-pin power connector.
Rack Power Connector:
4-pin, power from RK5000PS-3U.
Power Connector (3.5 mm):
2-pin; stand-alone power, 12 VDC or 24 VAC.
UTP Connector:
8-pin connector with removable mating connector.
BNC Connectors (4):
Coaxial output.
DIP Switches (4):
Override the adaptive technology with the manual selection of cable
distance (1,000-4,000 feet or 305-1,219 meters). Switch 1 on each DIP switch is used for
selecting high mode or low mode.
selecting high mode or low mode.
L
FRONT
BACK
BOTTOM