Invacare XPO100B Manuel D’Utilisation
SECTION 6—OPERATING INSTRUCTIONS
Invacare XPO
2
™
32
FIGURE 6.9 Adjusting the Pulse Flow Setting
Using the XPO
2
Portable Concentrator
1. Turn the XPO
2
On by pressing the On/Off button.
2. Breathe normally through your nose. Breathing through
your mouth may result in less effective oxygen therapy.
The XPO
The XPO
2
will put out a measured pulse of oxygen each
time it detects inhalation. The blue flow setting indicator
light will blink each time an inhalation is detected and the
XPO
light will blink each time an inhalation is detected and the
XPO
2
outputs a pulse of oxygen.
3. Turn the XPO
2
Off by pressing and holding the power
On/Off button for approximately two seconds.
NOTE: The time required for the XPO
2
to reach maximum oxygen
concentration after being turned On is approximately 5 minutes.
FLOW SETTING
AVERAGE PULSE VOLUME (AT 20
BREATHS PER MINUTE)
1
15 ml
2
23 ml
3
31 ml
4
37 ml
5
42 ml
On/Off Button
Flow Selection
Indicator Lights