VIZIO VUR8 Manuel D’Utilisation
VIZIO VUR8 Universal Remote User Manual
Version 2/17/2009
3
www.VIZIO.com
1.1
1.1
1.1
1.1 VIZIO UNIVERSAL REMOTE CONTOL *
VIZIO UNIVERSAL REMOTE CONTOL *
VIZIO UNIVERSAL REMOTE CONTOL *
VIZIO UNIVERSAL REMOTE CONTOL *
The VIZIO Universal Remote Control is a comprehensive remote that can be used to control up to four
different devices. The remote button functions are explained on the following pages.
Remote LED – Blinks when the remote operates.
SET - This button starts all programming of the Remote Control.
POWER - Press this button to turn the device on from the Standby
mode. Press it again to return to the Standby mode.
mode. Press it again to return to the Standby mode.
DVD - This button selects a programmed DVD player.
AUDIO - This button selects a programmed Audio
Receiver/Amp/Home Theatre System.
CABLE - This button selects a programmed cable TV set-top box
or a satellite TV set-top box.
TV - This button has been pre-programmed to select the codes to
operate the VIZIO HDTV.
or a satellite TV set-top box.
TV - This button has been pre-programmed to select the codes to
operate the VIZIO HDTV.
1 thru 0 - Use these buttons to select a channel or enter a
password.
INPUT - This button allows the user to cycle through the inputs.
–
The DASH button is for the DTV mode. When selecting a
digital channel directly use this button for the separation of main
and sub-channels. For example, channel 28-2 would be selected
and sub-channels. For example, channel 28-2 would be selected
by the button sequence 2 8 DASH 2.
*NOTE: This is a programmable remote supporting up to 4 devices
(see TV, VCR, CABLE, DVD buttons at the top of the remote). If the
remote is not working with your VIZIO TV, press the TV button on the
remote to set the functions back to TV.
(see TV, VCR, CABLE, DVD buttons at the top of the remote). If the
remote is not working with your VIZIO TV, press the TV button on the
remote to set the functions back to TV.