Avaya AP70 Manuel D’Utilisation
Aruba Mobility Controller
Configuration Guide
VIEW Certified
Page 9
Channel and Tx power
Channel and Tx power level can be manually set or configured to be assigned automatically
depending on the RF environment. Please consult your facility’s RF site survey designed for
voice to determine the correct channel, power and data rate settings. NetLink wireless
telephones require the following minimum dBm reading to support the corresponding
“Required” data rate setting in the access point.
depending on the RF environment. Please consult your facility’s RF site survey designed for
voice to determine the correct channel, power and data rate settings. NetLink wireless
telephones require the following minimum dBm reading to support the corresponding
“Required” data rate setting in the access point.
802.11
Radio Standard
Minimum Available
Signal Strength (RSSI)
Maximum
"Required" Data Rate
-70 dBm
1 Mb/s
802.11b
-60 dBm
11 Mb/s
-63 dBm
6 Mb/s
802.11g
-47 dBm
54 Mb/s
-60 dBm
6 Mb/s
802.11a
-45 dBm
54 Mb/s
For additional details on RF deployment please contact your service representative.
Recommended AP configuration settings
CLI Commands
Required Settings
Default
Settings
Settings
Description
Max-clients <x>
40
0
Max clients that can associate
with the AP.
with the AP.
Beacon-interval
<x>
<x>
Set to default
100
milliseconds
milliseconds
The interval at which beacons
are sent out .
are sent out .
dtim-period <x>
3
1
Delivery Traffic Indication
Message interval in terms of
beacon interval.
Message interval in terms of
beacon interval.
hide-essid <enable
/ disable>
/ disable>
Enable
Disable
To disable the ESSID from
being broadcasted.
being broadcasted.
Max-retries
2
4
Maximum number of times the
AP tries to send a packet to the
client before discarding the
packet.
AP tries to send a packet to the
client before discarding the
packet.
b/g-mode
Mixed
Mixed
The radio mode of the b/g
radio.
radio.