Razor E300s Manuel D’Utilisation

2

      WARNING:  

DO NOT USE NON-RAZOR 

PARTS WITH YOUR RAZOR 

ELECTRIC SCOOTER. The 

scooter has been built to certain 

Razor design specifications. The 

original equipment supplied at the 

time of sale was selected on the 

basis of its compatibility with the 

frame, fork and all other parts. 

Certain aftermarket parts may or 

may not be compatible and will 

void your warranty.

Remove contents from box. Remove the foam separators that protect the components from damage during 

shipping. Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have 

occurred during shipping. Because the scooter is 95 percent assembled and packed at the factory, there 

should not be any problems, even if the box has a few scars or dents.

Allow up to 10 minutes for assembly, not including initial charge time. 

Allow up to 12 hours for initial charge (see page 5 for charging information)

Charger

Plug

Charger

Port End

3.

 Charger 

  (Note: Charger design  

  may vary from one shown)

Need Help? Visit our website for replacement parts, product support and a list of authorized service centers 
at www.razor.com or call toll free 866-467-2967 Monday - Friday 8AM - 5PM Pacific Time. Please have the 
product I.D. code (located on the white label on your product or back of charger) available for better assistance.

1. Handlebar

 Stem

2. Battery Tray

Twist Grip Throttle

1. Handlebar Stem
2. Battery Tray
3. Charger
4. UPC Side of Box (not shown)

5 mm Allen Wrench (Included) 

Two (2) 4 mm Allen Wrenches 

(Only Included with E300S)

8 mm/10 mm/16 mm 

Wrenches (Not Included)

Phillips Screwdriver 

(Only Included 

with E300S)

Valve Extender 

(Located in right 

handlebar grip)

Bicycle-style tire pump 

for Schrader valve tires 

with pressure gauge 

(Not Included)