Invacare 1200 Manuel D’Utilisation
OPERATING THE BATH LIFT
16
FIGURE 2.8 Mounting the Battery Charger
Charging the Battery
NOTE: For this procedure, refer to FIGURE 2.9 on page 17.
Using the Wall-Mounted Battery Charger
1. Lift the battery lid (Detail “A”).
2. Disconnect the battery connectors.
3. Remove the battery from the lift.
4. Lift the lid on the battery charger.
5. Position the battery into the battery charger.
6. Connect the charger connector to the battery connector.
7. Plug the battery charger into a power outlet.
8. Charge the battery.
9. Lift the battery charger lid (Detail “A”).
10. Disconnect the charger connector from the battery connector.
11. Remove the battery from the battery charger.
12. Install the battery into the lift.
13. Connect the battery connectors.
14. Close the battery lid.
Mounting
Holes
Battery
Charger
Mounting
Bracket
NOTE: Battery charger not shown.
Battery
Charger
Power
Cord
Charger
Cord
DETAIL “A” -
BATTERY
CHARGER