Invacare 1600 Manuel D’Utilisation

OPERATING THE BATH LIFT

Using the On-Board Battery Charger

NOTE: For this procedure, refer to FIGURE 2.10.

CAUTION

If the charging cord is not locked into the battery charge port the battery will not

charge fully.
Always unplug the charging cord from the battery charge port before wheeling the

lift away. Otherwise, damage to the charging cord will occur.

1. Plug the charging cord into the battery charge port by performing the following steps:

A. Insert the charging cord into the battery charge port.

B. Rotate the charging cord to lock it into the battery charge port.

2. Press the switch to the Charge position.

3. Plug the battery charger into a power outlet.

4. Charge the battery.

5. Perform the following steps to disconnect the charging cord from the battery charge

port:

A. Rotate the charging cord to unlock it from the battery charge port.

B. Remove the charging cord from the battery charge port.

6. Press the switch to the Lift position.

FIGURE 2.10 Using the On-Board Battery Charger

Battery

Charge Port

Switch

LIFT

Position
(Down)

CHARGE Position (Up)

Battery

Charger

Charging Cord