Invacare 1600 Manuel D’Utilisation
ACCESSORIES
29
SECTION 6—ACCESSORIES
Installing the Stretcher Cover
NOTE: For this procedure, refer to
FIGURE 6.1.
FIGURE 6.1.
NOTE: This procedure applies to the
IHTRV1210 Mesh Stretcher Cover.
IHTRV1210 Mesh Stretcher Cover.
1. Press and hold the buttons on the
stretcher frame (Detail “A”).
2. Raise the right and left wing arms of the
stretcher to an upright position.
3. Align the stretcher cover with the
stretcher frame.
4. Slide the stretcher cover down over the
frame (Detail “B”).
NOTE: Ensure the long white straps with the
male ends of the buckles are in the front of the
stretcher.
male ends of the buckles are in the front of the
stretcher.
5. Tuck the cover down under the button
knobs.
6. Fasten the three white buckles to secure
the stretcher cover to the stretcher
frame.
frame.
7. Fasten the 2‐inch blue straps around
the bottom of the stretcher frame. DO
NOT overtighten the straps, otherwise
the wing arms will not lower smoothly
to the flat position.
NOT overtighten the straps, otherwise
the wing arms will not lower smoothly
to the flat position.
8. Attach the button cover securely onto
the stretcher frame using the hook and
loop fasteners (Detail “C”).
loop fasteners (Detail “C”).
9. Attach the safety straps through the
slots on the back of the stretcher cover
(Detail “C”).
(Detail “C”).
FIGURE 6.1 Attaching the Stretcher Cover
Stretcher
Cover
White Strap
Buckle
Blue Strap
Stretcher
Frame
Button
Wing Arm
Stretcher
Frame
DETAIL “A” - WING ARM
Button
Cover
DETAIL “B” - STRETCHER COVER
DETAIL “C” - BUTTON COVER AND
SAFETY STRAPS
Safety Straps