Sony DVW-M2000P Manuel D’Utilisation
3-2
Reference Signals for Video Output and Servo System
Chapter 3
Preparations
3-10
Chapter 3
Preparations
3-5
Cassettes
3-5-2 Inserting and Ejecting
Cassettes
Cassettes
It is not possible to insert or eject a cassette unless the
unit is powered on.
unit is powered on.
Inserting a cassette
1
Turn the POWER switch on.
2
Check the following points, then insert the cassette
in the orientation shown in the figure.
• Check that message “ERR-10” is not shown in
in the orientation shown in the figure.
• Check that message “ERR-10” is not shown in
the time data/menu display section.
• Check that there is no slack in the tape.
The cassette is drawn into the unit, and the
STANDBY and STOP buttons light.
STANDBY and STOP buttons light.
If message “ERR-10” appears in the time data/menu display
section, there is moisture condensation in the unit (see page
14-4).
section, there is moisture condensation in the unit (see page
14-4).
3-5-1 Cassette Types
This unit uses the following digital Betacam cassettes
for both recording and playback.
for both recording and playback.
Digital Betacam cassettes
The following tapes can be used for playback (on
DVW-M2000/M2000P).
• MPEG IMX cassettes
• Betacam SX cassettes
• Betacam SP cassettes (metal tape)
• Betacam cassettes (oxide tape)
DVW-M2000/M2000P).
• MPEG IMX cassettes
• Betacam SX cassettes
• Betacam SP cassettes (metal tape)
• Betacam cassettes (oxide tape)
1
2
F FWD
REW
PLAY
STOP
STANDBY
Large cassette
STOP button
STANDBY button
Small cassette
EJECT button
Small cassettes
Large cassettes
BCT-D6/D12/D22/D32/D40
BCT-D34L/D64L/D94L/D124L