TANDBERG 2200 Manuel D’Utilisation

 

105 

• 

Side-by-side 

 

 

• 

Loudest speaker with small picture-in-
picture 

 

• 

Loudest speaker with large picture-in-
picture 

 

speakers will exchange places depending on who is 
speaking. 

Use these fields to specify the range of multicast 
addresses to which the IP VCR may send multicast 
media for streaming. 

If these values are not configured, the IP VCR will 
be unable to stream recordings using multicast 
media. 

Multicast addresses are in the range 224.0.0.0 to 
239.255.255.255 inclusive. 

Sets the range of port numbers to which multicast 
media will be sent. 

This UDP port number range is used in conjunction 
with the Multicast transmit IP address range. 

You must set both the start and end port numbers 
to transmit recordings by multicast streaming. 

Sets the media players that can be used for watching 
recordings. 

This is a unit-wide setting that affects the options 
available to a user selecting to watch a recording. 

Sets the protocol that Windows Media Player will 
use. 

The default protocol for Windows Media Player is 
HTTP and v11 no longer supports MMS over UDP or 
MMS over TCP. 

Enables the IP VCR to record video at up to HD 
quality. If you leave this option unselected, the IP 
VCR will record the video at up to SD quality only.  

Only enable this mode if you want to make HD 
recordings.  

When 

 is on, live streaming 

is automatically disabled. This is because HD video 
recordings cannot be live streamed on the IP VCR; 
HD recordings must be transcoded before they can 
be streamed.  

Note that this setting takes effect when a recording 
is started. If you change this setting, recordings in 
progress will use the setting with which they 
started. You can temporarily enable this mode for 
individual recordings if required.  

HD recordings cannot be played back on a video