TANDBERG 2200 Manuel D’Utilisation

 

17 

Note that if you are intending to use this method frequently with the same folder, it will be quicker to configure the 
recording ID as an endpoint on the MCU. The procedure is the same as when you configure an H.323 endpoint on the 
MCU. For more information, on the MCU, go to 

 

and view the online help.  

By configuring the IP VCR as a gateway on the MCU in conjunction with using recording IDs on the IP VCR, you can 
automatically record conferences directly into the folders of your choice on the IP VCR without the need for a 
gatekeeper.  

1.  Configure the IP VCR as a gateway on the MCU: on the MCU, go to 

 and click 

. Enter the name and IP address of the IP VCR and complete the page using the MCU's online help for 

more information.  

2.  On the MCU, go to 

 and click 

. For information about conference 

configuration, refer to the MCU's online help. 

3.  From the 

, select the conference you have created and click 

. 

4.  In the 

 field, type the recording ID for the IP VCR folder into which you want to record. 

5.  Select the gateway you configured in step 1 and complete the page using the MCU online help for more 

information. Note that you might want to set 

 and 

 to Muted. Enable 

; this ensures that the IP VCR stops recording when the conference ends. 

When the conference starts, the IP VCR will start recording the session into the folder with the recording ID that you 
used in step 4.  

Note that if you are intending to use this method frequently with the same folder, it will be quicker to configure the 
recording ID as an endpoint on the MCU. The procedure is the same as when you configure an H.323 endpoint on the 
MCU. For more information, on the MCU, go to 

 

and view the online help.