TANDBERG 2200 Manuel D’Utilisation

 

65 

The IP VCR is pre-configured with two user accounts ("admin" and "guest"), but you can also add other users (see 

). Refer to the table below for descriptions of the pre-configured users.  

The IP VCR must have at least one configured user 
with administrator privileges. By default, the User 
ID is "admin" and no password is required.  

After logging into the IP VCR for the first time (see 

), you can change the 

User ID and password for this account. The 
privilege level is fixed at administrator for the admin 
user - who can see all the pages and change settings. 

The IP VCR must have at least one configured user 
with access privileges below administrator. The fixed 
User ID for this user is "guest" and by default no 
password is required.  

You cannot change the name of the "guest" User 
ID, but you can add a password.  

You can modify the system defined user accounts if you need to. For example, for security, you should add a password to 
the admin account.  

Note that you can also create new accounts with administrator or lower access privileges in addition to these pre-defined 
users (see 

). 

Refer to these topics for assistance in modifying these users: 

• 

 

• 

The "admin" user is the default login account initially used to access the web interface. 

1.  Go to 

. 

2.  Click 

. 

3.  Refer to the table below to determine the most appropriate settings for the user.  
4.  After entering the settings, click 

. 

The log-in name used to access the IP VCR web 
browser.  

  

The required password, if any.  

  

Verifies the required password.  

  

The privilege level, which is fixed at administrator.   See 

 for detailed explanations.