Funai 31B-450 Manuel D’Utilisation
10
EN
Advanced Operations
Counter Memory
This feature can be used to memorize a beginning point that
you want to watch again. Rewinding or fast forwarding makes
it easy to locate this point.
you want to watch again. Rewinding or fast forwarding makes
it easy to locate this point.
Note: •
If a tape includes both programmes recorded in the
PAL system and ones recorded with NTSC system,
this function may not be operated correctly.
PAL system and ones recorded with NTSC system,
this function may not be operated correctly.
•
TAPE COUNTER MEMORY does not function if
the Auto Repeat mode is set to ON. In this case, set
the Auto Repeat mode to OFF.
the Auto Repeat mode is set to ON. In this case, set
the Auto Repeat mode to OFF.
1) Stop the tape at the desired point.
2) Press
2) Press
TAPE COUNTER RESET
to display 0:00:00.
3) Press
TAPE COUNTER MEMORY
so that “M” appears on
the TV screen.
4) Press
REC/OTR
or
PLAY
/
K
.
•Press
STOP
/
L
when recording or playback is completed.
5) Press
REW
/
s
or
F.FWD
/
B
. The VCR will automatically
stop when the counter returns to 0:00:00 (approx.)
To Exit the Counter Memory
Press
TAPE COUNTER MEMORY
so that the “M” disappears
from the TV screen.
Note:
When you set the Auto Repeat mode to ON while the
Counter Memory mode is ON, the VCR exits the
Counter Memory mode automatically.
Counter Memory mode is ON, the VCR exits the
Counter Memory mode automatically.
OTR (One Touch Recording)
This function enables you to set the duration of a recording
simply by pressing
simply by pressing
REC/OTR
.
1) Follow steps
1)
to
3)
in “Viewing and Recording the Same
Programme” section.
2) Press
REC/OTR
repeatedly until the desired recording
length appears in the upper left corner of the TV screen.
Recording stops when 0:00 is reached.
• To check time remaining during an OTR
Press
DISPLAY
.
• To change the recording length during an OTR
Press
REC/OTR
repeatedly until the desired length appears.
• To stop an OTR before recording is finished
Press
STOP
/
L
.
• To cancel the OTR but continue recording
Press
REC/OTR
repeatedly until “I” appears without the
recording length.
Auto Repeat Playback
The VCR has an auto repeat function that allows you to repeat
a tape indefinitely without touching
a tape indefinitely without touching
PLAY
/
K
.
• Use the remote control for this procedure.
• Insert a pre-recorded tape.
1) Press
• Insert a pre-recorded tape.
1) Press
MENU
.
2) Press
PLAY
/
K
or
STOP
/
L
to select “SET UP”, then press
F.FWD
/
B
.
3) Press
PLAY
/
K
or
STOP
/
L
to select “AUTO REPEAT”.
4) Press
F.FWD
/
B
so that “ON” appears next to “AUTO
REPEAT” on the TV screen.
When in Stop mode, Auto Repeat mode will start
automatically.
If the on-screen menu still remains, press
When in Stop mode, Auto Repeat mode will start
automatically.
If the on-screen menu still remains, press
MENU
to exit,
then press
PLAY
/
K
.
Note: •
Once you select the Auto Repeat mode, it stays in
effect even after you turn off the VCR.
effect even after you turn off the VCR.
•
TAPE COUNTER MEMORY does not function if
the Auto Repeat mode is set to ON.
the Auto Repeat mode is set to ON.
•
When you set the Auto Repeat mode to ON while the
Counter Memory mode is ON, the VCR exit the
Counter Memory mode automatically.
Counter Memory mode is ON, the VCR exit the
Counter Memory mode automatically.
To Stop Playback
Press
STOP
/
L
.
To Exit the Auto Repeat Mode
Repeat steps
1)
to
3)
.Then, press
F.FWD
/
B
.
“OFF” will appear next to “AUTO REPEAT” on the TV
screen. Press
screen. Press
MENU
to exit.
I I [0:30] I[1:00]... I[7:30] I[8:00]
(Normal (OTR:
recording) 30 minutes)
(Normal (OTR:
recording) 30 minutes)
MENU
TIMER
SET UP
INITIAL
SET UP
INITIAL
MENU
TIMER
SET UP
INITIAL
SET UP
INITIAL
SET UP
AUTO REPEAT
[ON]
PICTURE
[NORMAL]
AUTO RETURN
[ON]
HM210BD(EN).fm Page 10 Thursday, March 2, 2006 6:07 PM