Jeep 50-0283x-017 SERIES Manuel D’Utilisation

                                                                                                3

 

IF VECHICLE IS NOT EQUIPPED WITH A FACTORY 10 DISC 
CD CHANGER, PROCEED TO STEP 5. 

 

 
 

 

 
 

1. Locate the O.E.M. CD changer  housing  

mounted to the rear passenger side of vehicle. 
Remove and discard (4) four screws. Remove 
and discard housing by moving it upward and 
outward.    See Figure 1. 

 
 
 
 

 
      
                     

2.  Disconnect wiring from CD changer.                                          

        See Figure 2. 

3.  Using a 10mm deep socket, remove and retain 

(4) four  6mm nuts which secure bracket to 
vehicle.  See Figure 2. 

 

 
 
 
4.   Remove bracket from vehicle. Remove and 

retain (6) six screws which secure CD 
changer to bracket. See Figure 3. Lay CD 
changer in a safe place. Discard bracket. 

 
 
 
IF VECHICLE IS EQUIPPED WITH A FACTORY 10 DISC 
CD CHANGER, PROCEED TO STEP 6. 

 

 

 

 

FIGURE 1 

FIGURE 2 

FIGURE 3