A&D UC-321PBT-G Manuel D’Utilisation
Display Symbols
Ready/Complete symbol. This symbol is displayed when the measure-
ment display is stable.
ment display is stable.
Low battery mark. If this mark is displayed, replace the batteries with
new ones.
new ones.
Installing (or Replacing) Batteries
Caution
Insert the battery with the positive (+) and negative (-) terminals properly aligned
with the corresponding symbols in the battery compartment.
Improper installation of the batteries may cause battery leakage.
Replace all four batteries with new ones, when
with the corresponding symbols in the battery compartment.
Improper installation of the batteries may cause battery leakage.
Replace all four batteries with new ones, when
symbol is displayed.
Do not mix used and new batteries. It may result in damage to the scale or
shorten battery life.
The battery life is dependant upon the environmental temperature, battery
type and usage.
Remove the batteries from the battery compartment, when the scale is not to
be used for a long time. They may leak and damage your scale.
shorten battery life.
The battery life is dependant upon the environmental temperature, battery
type and usage.
Remove the batteries from the battery compartment, when the scale is not to
be used for a long time. They may leak and damage your scale.
Steps for Installing (or Replacing) Batteries
1
Remove the battery compartment cover on the
underside of the scale by gently pushing on
the arrow and lifting the cover backward.
underside of the scale by gently pushing on
the arrow and lifting the cover backward.
2
Place four new batteries with the positive (+)
and negative (-) terminals properly aligned with
the corresponding symbols in the battery com-
partment.
and negative (-) terminals properly aligned with
the corresponding symbols in the battery com-
partment.
3
Replace the cover by sliding it into the com-
partment and gently pressing into place.
partment and gently pressing into place.
- 3 -